SDS Users Need some measurements please

Discuss topics related to the CA18DE and CA18DET series engines.
BACARDI_DWB
Posts: 377
Joined: Mon Jul 31, 2006 7:44 am

Post

Hello,

I am making a template for my custom dash to be sent out for some work to be done and i need some pretty close measurements from you SDS users if you can please.

What i need is the LCD WxHxD in inches pleaseand the fuel control knob box WxHxD in inches also please

I really appreciate this guys. Thanks for the help in making a clean dash!


BACARDI_DWB
Posts: 377
Joined: Mon Jul 31, 2006 7:44 am

Post

alright just so you guys can see what i am working on here is a little sketch of what i am trying to do.



now the "510" is done in the classic 510 logo and it will have a red plastic behind it with a light behind the plastic so when the lights are on the "510" lights up red. (all the lights are going to be red including the gauge lights) also the turn signals are the old 50's style that are done exactly how the "510" is done. the dash is going to be done in brushed aluminum. and the SDS equipment will be backset into the dash for a flush fit. i don't know if i will have that many switches but that is where they will be placed... need those measurements so i can find out how much room i actually have. thanks guys!!

BACARDI_DWB
Posts: 377
Joined: Mon Jul 31, 2006 7:44 am

Post

bumpity

User avatar
float_6969
Moderator
Posts: 17366
Joined: Mon Aug 26, 2002 1:55 pm
Car: CA18DET swapped 1995 Nissan 240sx (too many mods to list)
2015 SV Leaf w/QC & Bose (daily)
Location: Topeka, Kansas
Contact:

Post

Hand controller: 11.5cm x 9cm x 3.4cmFuel control knob: 9.9cm x 4.9cm x 2.5cm

User avatar
float_6969
Moderator
Posts: 17366
Joined: Mon Aug 26, 2002 1:55 pm
Car: CA18DET swapped 1995 Nissan 240sx (too many mods to list)
2015 SV Leaf w/QC & Bose (daily)
Location: Topeka, Kansas
Contact:

Post

aww crap. I thought you were from austrailia for some reason and I measured it in CM. sorry!

BACARDI_DWB
Posts: 377
Joined: Mon Jul 31, 2006 7:44 am

Post

hey no worries i will just turn the ruler around! thanks your awesome!!

User avatar
float_6969
Moderator
Posts: 17366
Joined: Mon Aug 26, 2002 1:55 pm
Car: CA18DET swapped 1995 Nissan 240sx (too many mods to list)
2015 SV Leaf w/QC & Bose (daily)
Location: Topeka, Kansas
Contact:

Post

No prob. Good luck!

BACARDI_DWB
Posts: 377
Joined: Mon Jul 31, 2006 7:44 am

Post

well i got the template done. man its close. i had to move the speed and the tach closer together to fit the LCD programmer in there. its going to be a close one... but it will be pretty clean i think... thanks again float


Return to “CA18DE / CA18DET Forum”