safc controller on 5th gen maxima

[silver2000max]

i was wondering if there was anyone running an apex'i safc fuel controller on their 5th gen. if so can you tell me if its worth the time and money to install one. Thanks

[allensteiner]

on a stock motor? no point.

[silver2000max]

i do have a cold air intake and am thinking about putting an exhaust on. also i have hooked a scan tool up to it and pulled codes saying the car was lean in banks one and two. i was going to see if hooking the safc would correct the problem of it being lean.

[allensteiner]

intake and exhaust won't have much effect on your afr - not enough to tune. most newer cars now say they run lean (like my 05 bonneville) because of emissions. unless you put a blower on it you don't need to tune. plus if you don't know what you're doing you won't pass inspections and your car will run like crap.

[silver2000max]

well i dont have to worry about inspections in northern ky lol. but thanks for the input

[allensteiner]

no prob. if you want to spend money on engine control get a jwt ecu.

[silver2000max]

will all their ecu's be compatible for 5th gen maximas

[allensteiner]

it's best to call them. they can program it to the specs you want.

[silver2000max]

alright ill have to do that sometime down the road