Some of you may have heard that Motordyne released an exhaust system. If not, go here:
http://www.motordyneengineering.com
This is the same company that "makes" the MREV2 and spacers.
Anyways, I found out about the exhaust a few months before it was released and tried working something out with Tony @ MD to get some sort of deal on his exhaust system. My goal was to buy a nice audio recorder and do recordings of the MD exhaust in it's various forms (it's modular-very interesting). Then do recordings of other exhausts with the same audio setup so that we'd have a nice ACCURATE collection on exhaust notes for NICO.
Well, I spoke to him. He was slightly interested, but wasn't going to give me much of a deal (remember, I'd be spending a few hundred on an audio recorder AND driving around 150-200 miles). I quickly found out that a high end audio recorder was going to put me back WAY too much and just let the idea of getting an exhaust die.
Recently, I did some work for a guy (installed a grounding kit, Stillen intake, MD MREV2, Aramid Gasket, 5/16th spacer). Then he asked me to do a brake swap for him (stock brakes to Brembos).
He offered me the MD exhaust in trade for my work. Which I accepted (thinking YES! I get my exhaust). Well, a little research and some family changes mean that my 4 month old son will likely be an unhappy camper in the back of my coupe if I install the exhaust
So I have a $1300 exhaust that I can't use. Check out the link in my sig if you're interested or know somebody who might be. The exhaust is missing 2 V clamps which I will buy and ship if/when somebody buys this.