S15 T28 install question

[RobDET]

Hey guys As some of you know i'm working out my S15 T28 on S13 redtop install. I need something to go between the high pressure inlet side of the turbo and the hot pipe. It looks like my stock elbow will fit but it will be tilted funny and i would have to cut my hot pipe.

Are their any factory parts that will work?

[Onizuka]

I used a 45 degree bend samco silicon hose and a reweled hotpipe. Couldnt have costed more than like $50 total.

[Onizuka]

Here's a picture of what im talking about:

[VitaminT]

I believe SPL Parts has the Kazama "clocking plates" for like $50 on clearance right now. You might check with them as they would make your stock inlet and outlet line back up right.

[Cyberkreig]

i cut about 1" off of my enjuku pipe on an angle. works fine

[driver_mxivm]

Hey RobDET, your car looks like my car.

http://server.tekro.com/~autox...30100

[RobDET]

Hell yah it does! That's pretty sweet. You know we aren't legal in SM... You aren't suposed to modify the headlights... :rolleyes

Is yours the original color??

[S13_SM]

The color came from the Toyota Supra,it's Royal Sapphire Pearl. I think front end should be legal, since all the parts are stock in Japan. Also what good does that do for the miniumum weight requirements. What kind of setup do you have for autocross?

[RobDET]

Mine is still the stock Nissan blue. Aparently a rare color...

Tien HE's (pillowballs) Battleversion RUCA's and Tension rods, Tien Tie rods and ends, Ebay front and rear STB's Some more stuf.