S15 Swap?

For the RWD SR20DET cars! Sponsored by Wiring Specialties.
Backfire
Posts: 90
Joined: Sun Jan 28, 2007 3:43 pm
Car: 2008 Altima Coupe
Location: Mechanicsburg, Pa

Post

I've been thinking about doing the S15 swap now for a while in my 95 240sx, currently I have a 1998 Blacktop SR20, but with my car now basically ready for paint, I've been looking for any information or links to help with my install. I know there is a few issues installing this motor, but I'd like to have some people help me out figuring out what special modifications that will need to be done. I searched under S15 motor and the search didnt find anything. Any help would be appreciated. Thank You.Cody


User avatar
adrianfromthecastle
Posts: 18849
Joined: Wed Jun 29, 2005 5:36 am
Car: 1992 Nissan 240sx
Location: California

Post

you'll need a new driveshaft, s15 to be exact.

Backfire
Posts: 90
Joined: Sun Jan 28, 2007 3:43 pm
Car: 2008 Altima Coupe
Location: Mechanicsburg, Pa

Post

with that driveshaft would there be any problems going into a J30 lsd or any other typ limited slip?

Also I saw the other post about the sensor that goes from the lsd would there be any issues on my car?

Any other issues like motor and transmission mounts?

User avatar
Initial_R90
Posts: 1539
Joined: Tue Jan 24, 2006 1:35 pm
Car: 2003 Zo6 Corvette RIP BLOWN up on the dyno

2003 Evo VIII

Post

just put a t28 from a s-15 and the same injectors and you got the same thing - the 6 spd that has a weak ouput shaft anyway

Backfire
Posts: 90
Joined: Sun Jan 28, 2007 3:43 pm
Car: 2008 Altima Coupe
Location: Mechanicsburg, Pa

Post

so the six speed is junk? I would have thought that it would have been better. Interesting.


Return to “SR20DET Forum (rear-drive)”