S14sr20det timing

For the RWD SR20DET cars! Sponsored by Wiring Specialties.
User avatar
1992MaxSE
Posts: 56
Joined: Sat Sep 23, 2006 4:52 am
Car: 91 240SX w/S14 SR

Post

hey fellow members, i was wondering if anyone had any experience setting the ignition timing on these. the s14sr is in a s13 if that matters. any advice would be greatly appreciated. thanks


User avatar
PyR0NiAk
Posts: 3851
Joined: Sun Mar 01, 2009 4:29 pm
Car: S13 SR W/ T2 GT3071R .86AR, JWT S4 Cams, 810cc Injectors,Z32 MAF, JWT tuned ECU 87mm 9:1 Compression CP pistons, Manley Rods
Location: Ohio
Contact:

Post

sr-swap-trouble-starting-t490923.html

Read down this thread until you find my first post... Sorry for the late response.. I, somehow, missed this post before.

User avatar
1992MaxSE
Posts: 56
Joined: Sat Sep 23, 2006 4:52 am
Car: 91 240SX w/S14 SR

Post

PyR0NiAk wrote:sr-swap-trouble-starting-t490923.html

Read down this thread until you find my first post... Sorry for the late response.. I, somehow, missed this post before.
so when i set the CAS sensor in the way shown and check the timing with a timing light it should be @ the 15 degree mark when warmed up. Correct?


Return to “SR20DET Forum (rear-drive)”