S14 to Z32 rear e-brake cable question

[raw0330]

I'm converting the rear brakes on my s14 to the z32 setup. I have everything I should need, and when I unpacked the new r33 e-brake cables, the brake ends are quite different. The right side is correct, and I expected he left side to be a mirror image of it, and it's not. has anybody else run into this, and if so, what's the solution? I have searched, and couldn't find anything conclusive. The only thing that I found was that the r33 cables should work without splicing anything. Thanks for your help, guys!

[kclo4]

I don't recal mine being any different. Maybe the position of the mounting bracket? The ball end was the same as the drums are just mirror images of each other. Maybe they sent you the wrong part number. Mine were "plug and play."

[float_6969]

Yea, it sounds to me like one of the lines they sent you was the wrong one.

[raw0330]

Thanks for your input, guys. I contacted the company and they shiped the wrong one. The correct one is already on the way. If anyone reads this, Performance Nissan really has their act together...