S14 SR20 >>> S14 KA questions

General discussion forum about the 240sx, and a great place to introduce yourself to the board!
User avatar
E7-S14
Posts: 5214
Joined: Sun Jun 25, 2006 12:20 pm
Car: ess 14 foo!
Contact:

Post

i swapped a s14 SR into my s14 about a year ago.i had the interior plug wiring done by a specialist.

but i did the wiring modifications under the hoodlengthening the maf plug wire and the 02 sensor wire which are on the harness.

i vaguely remembering re-pining one other plug in the engine baybut i cant quite remember if it was on the SR harness or my KA engine bay harness.

what im asking issince im going BACK to KA>would i have to repin that plug if it was in fact in the engine bay harness.i just honestly cannot remember.

or would all i need to do is drop the KA in and plug all the wires that go to the engine bay up

if that makes sense.i just cant remember about that one plug that i MAY have repined.


tx240s14
Posts: 53
Joined: Tue Apr 21, 2009 6:42 pm
Car: 96 240sx

Post

just wondering... why are u going back to ka?

User avatar
schanne
Posts: 1281
Joined: Sun Sep 24, 2006 4:39 pm
Car: 93 Hatch-Sr20

Post

You will need repin back to the way it was. Just do some research and find out what you repined.

User avatar
E7-S14
Posts: 5214
Joined: Sun Jun 25, 2006 12:20 pm
Car: ess 14 foo!
Contact:

Post

tx240s14 wrote:just wondering... why are u going back to ka?
ive spent too much money into the SR.i blew ringlands in one.picked up another one that was half stripped down to swap. but ran into problems with it.

i don't want to deal with it anymore.i need a reliable setup.and a KA will give me that
schanne wrote:You will need repin back to the way it was. Just do some research and find out what you repined.
i know it has to go back the way it was. i just don't remember what it was. if anything.which is why i made a thread asking if anyone would happen to know.

as far as i remember. i don't think anything needs to be changed.the interior plug in my car should have been untouched and the plugs in the bay should have been untouched also.i just remember repining one plug in the bay but cant remember if it was on the SR harness.

User avatar
S13Joe
Posts: 1741
Joined: Tue Sep 09, 2008 9:50 am
Car: 92 Coupe

Post

If you already have a harness wired up for the SR then I think you should just keep the harness and find a new one for your KA. You know you can find them around here for around $50. Just makes more sense to me in case you decide to go SR again.

User avatar
schanne
Posts: 1281
Joined: Sun Sep 24, 2006 4:39 pm
Car: 93 Hatch-Sr20

Post

Sell the sr wiring harness= 200Buy a ka harness= 50Extra 150= party in your pants

noobdrftr
Posts: 851
Joined: Sun Nov 30, 2008 4:56 am
Car: of crap...just pure crap

Post

^^^i agree

SR24DET
Posts: 726
Joined: Sat May 19, 2007 6:41 pm
Car: RMS13

Post

schanne wrote:Sell the sr wiring harness= 200Buy a ka harness= 50Extra 150= party in your pants
x3

User avatar
Elbowblk
Posts: 377
Joined: Mon Mar 03, 2008 7:25 pm
Car: 95 240sx

Post

this was your n/a sr right?

User avatar
E7-S14
Posts: 5214
Joined: Sun Jun 25, 2006 12:20 pm
Car: ess 14 foo!
Contact:

Post

yeah it was N/A then i boosted itthen ran into some problems(ringlands)then picked up another N/A SR that was stripped.started to swap it and lost interest.

thats basically it..im really excited to get a KA back in.i loved my old KA.and now i could stop pouring money into my dam motor ha

but we got this taken care of.we swap the KA in tommorow


Return to “240sx General Discussion”