S14 SR20 into S14 Help Needed

[Slammed95S14]

Alright. So I've searched the forums, and found a couple threads. But I'm getting ready to do my swap, I don't really want to have to pay someone to do something that is fairly simple. The threads that I did find, I opened both the Zenki and SR wiring diagrams. But the pinouts don't line up.

So if anyone can help me, and post the re-wiring procedure, that would be great. Thanks.

[shift_SRDETuser]

No

Alright. So I've searched the forums, and found a couple threads. But I'm getting ready to do my swap, I don't really want to have to pay someone to do something that is fairly simple. The threads that I did find, I opened both the Zenki and SR wiring diagrams. But the pinouts don't line up.

So if anyone can help me, and post the re-wiring procedure, that would be great. Thanks.

No why no one is willing to help? Because what you seek does not exist. Use one of the sponsors advertisement links and send the wire harness off to have it professionally done. This is the hardest part of wiring in the whole engine.....

[fast_s13]

i have a write up out there some of the info is wrong...i have my wiring harness out of my car right now doing some cleanning up on it i will take pictures of it and redo my right up but it will be a little hard since i have depinned the unused wires

[Slammed95S14]

I don't really want to send the harness off. I would rather do it myself if possible.

Thanks. Let me know when you get it up.

[fast_s13]

well basically to do the write up the right way i need someones unmodified s14 sr harness

[fast_s13]

anyone wanna make a deal and send me there harness so i can do the write up

[Spegt]

Dude here is my e-mail. Send me an message and i will send you a vid of everything you need to do.

Name-SpencerE-mail- [email protected]?- YES...A LOT

[nzmoman]

isn't one of the sponsors working on the s14sr into us s14 swap guide right now? I have mine done, but its in a 97 so it is going to be a little different from yours. I still have not repinned my dash harness yet so I have no wipers. but good luck on this. A good write-up for this harness and the kouki w/zenki SR is long overdue.

[MR LEES 240SX]

this is a older posting but would you tell me if you finished you re-pin on you s14 could use the help if you don't mine helping me out. Thank you for any help.

[Acuratechva]

email me if you got specific questions. i've done 4 s14sr Zenki swaps.

[MR LEES 240SX]

Just trying to find out what plugs are involved. If there is a how to on line some were on how to re pin the sr2odet. If I could find a before and after set of pictures that would help me greatly. Thank you for replying so fast.

[Acuratechva]

there are no diy's that are reliable. the only plug that required repining is the F4 on engine harness. all you have to do is open EC and EL sections in both sr and ka FSM's . and go through every diagram noting every component that goes through that plug. it is easy just time consuming.

[fast_s13]

Just trying to find out what plugs are involved. If there is a how to on line some were on how to re pin the sr2odet. If I could find a before and after set of pictures that would help me greatly. Thank you for replying so fast.

here are some after pictures of the harness

[LENTO S14]

nice pics very helpfull!!thanks