S14 Seat Belt Conversions S13

[TwoFortyCoupe]

Hi guys,
I recently bought S14 seat belts and want to put them in my S13. I have been looking up DIY's and found a few but each one seems to be a little different than others in terms of how much to cut from the interior panels etc. I was wondering if anybody has had first hand experience with the conversions or send me a link to a DIY that is universally correct,(I just don't want to cut the interior panels too much and want the swap to be safe). Any knowledge will help.

Thanks,
TwoFortyCoupe

[compactfean]

The swap is very straight forward and everything is direct bolt in except the 2 holes that have to be drilled for a small belt guide on each side and the plastics issue., honestly I would get the seat belts in first and then trim to fit the plastic. Not very hard at all and how the seat belts go in..... Completely safe.

[volcomskater773]

Slot the bottom of the panel. Just cut two slits and bend. Hole saw for the top bolt to go through. The coil just bolts to the body. You can pm me if you have any certain questions. Like he said its pretty straight forward.