S14 SE cluster in a S12 *pics*

NICO's official source for Nissan upholstery, carpet, headliners, and trim information!
User avatar
methylprop
Posts: 13
Joined: Thu Nov 05, 2009 8:24 am
Car: 1985 Nissan 200sx
Location: Springfield, MO
Contact:

Post

I had a spare s14 SE white face cluster I wanted to install in my s12. I finally got the ambition to do it and it turned out well. I had to trim the tabs off the s14 cluster and trim out about 4X4 inches on the each of the dash. the cluster and the lid need to drop in together and it's kind of a trick but not bad. There was no modification need for the cluster lid. I will be using the s14, 71c and the s14 speed sensor should be a easy wire up. Only thing is the s14 fuel sending unit read 5 ohms full and 90 empty. Most newer cars are set up this way but I'm not sure about the s12 but it should be the same. I will remove the cluster post more pics of the section that needs to be trimmed out. but over all it was pretty easy and the end product was great.


Image

Image

Image

Image

Image

Image


Return to “Interiors”