s14/rb26 swaybar option !?!?!

[rbs14kouki]

i have search in the forum for some option but have not found what i was looking for !!!

i'm running mckinney motorsports mounts / rb26 with rb26 oil pan !!!

i know i can put syko bracket on there but i think it will lower the swaybar . my car is slammed so it's not a option for me !!! - will it lower the swaybar , if it does by how mutch ???

i know the swaybar on the A31 cefiro/rb20det is bolt-on on a s14 but i cant find aftermarket one or even oem !!! i'm in Canada :S

i just found out about the Progress Ant-Roll Bars they have 3 position on the swaybar to instal the end link ... is it enough to clear my oil pan ?

help please !!! thanks in advance guys

sorry if me english is bad !!! i tried my best :S

[Coolwhip]

Hey P-O,

The progressive sway bar barely allowed for a RB20 in my coupe from experience. The endlink positioning only adjust the pre-load and not the actual positioning of the sway bar (in respect to oil pan clearances).

Many opt to notch their pan to allow fitment.

[rbs14kouki]

thanks ricky ... do you know by any chance a place i could source a A31 swaybar ?

[ST240]

check my thread out here:

zerothread?id=419303

Those provide a boat load of clearance.

since youre in canada i can cut you a deal. also, i havent tried them on an s14, but im quite sure they will work. if they dont i would have no problem giving you a full refund.

if youre interested, fire me an email at [email protected]

Edit: how low is your car? it cant be that low or it would barely be driveable.
Modified by ST240 at 4:02 PM 8/22/2009

[disrupt]

http://www.sykoperformance.com/SYKO%20SS%201.JPG

this is was ricky is talking about.

[rbs14kouki]

i will send you an email ST240 !!!

im tucking abit of rubber in the back and the front is OK ...

and for the oil pan mod ... i want to keep all the oil i can in the pan , i plan on drifting the car and need all the oil capacity i can !!!

and i would need to take the motor out of the car !!! and that is the last thing i would like to do !!!!

thanks guys for your help