s14 obd2 ka24de into s13

[masamunex03]

I don't post much as you can see because all my knowledge is based off of old threads but in this case there was no option. I know everyone is using the intake, exhaust, wiring harness, ecu and distributor from an s13 because of its ease. But I'm just trying to work with what I have. I used the "s13 sr" and "s13 sr into s14" and completely got rid of the SR and matched up both KA harness'. So I was wondering if someone could check out my method and tell me why it will or won't work. Thanks in advanced.

[candela]

Is there a link or something you meant to post up too or something?

FYI- an obd2 KA will work in an s13 (everything s14 that is). You have to treat it like you are swapping an SR in though...

[masamunex03]

Basically I used the "S13 SR into S14" wiring from sr20.hybrids.jp and found where the wires on the KA M63(interior big white plug)plug that would need to be matched up to the SR. I took those wires and mated them to the wires where the SR would go on the S13 chassis. Take a looky. http://www.imagestation.com/al...idx=0

[candela]

thats really cool that you did that! You should get that as a faq or sticky or something... good job!