s14 Kouki to Zenki center console conversion DIY!!!!

General discussion forum about the 240sx, and a great place to introduce yourself to the board!
User avatar
zevverlith
Posts: 5
Joined: Fri Feb 05, 2010 2:32 pm
Car: s14

Post

I know you all have been wanting to see this actually done in pictures, So I took the liberty of showing everyone this heavy mod! I have pictures in here too so that should make it better. Make sure your car is off while doing this though. I assume no liability for your car blowing up/the end of the world/more torque this mod produces or anything else that may happen in your ill misfortune by following this guide.

Requirements:Scissors x1Electrical Tape x1 rolls14 kouki center console x1s14 zenki center console x1hands x4

Alright so first of all you have to have your car!

alright then you have to remove the center console from your kouki shown here:

then remove the window switch from the zenki and hold it in your hand like this :

sweet. good job! now you want to remove the thingy with the wires out of it. shown here:

awesome job! k, nao cut some wires and stuff and strip them. Shown here:

wow you're getting good! alright now strip the wires off of the part you're going to attach those wires to:

swwweeeetttt modz dude! match up the colors on both ends of the wires and twist them around eachother, secure with electrical tape:

lookin good d00d. I wrapped them all together just for awesome jdm effect:

nauice. now attach the switch to see if it works.

OH NOEZ! CHECK ENGINEE LIGHT! (anyone have this prooblem too?)

K it works for me. reassemble the center console:

awesome job! p.s. custom boot shoe compliments to my grandma.

Thanks for viewing my guide guise. NO FLAMING PLEASE!

Modified by zevverlith at 12:10 AM 2/6/2010
Modified by zevverlith at 12:11 AM 2/6/2010


Hoffman5982
Posts: 1805
Joined: Sat Sep 29, 2007 7:20 pm
Car: '95 sr20det 240sx

Post

i dont really understand. your title has absolutely nothing to do with what you just did. It looks more like zenki to kouki mirror switch conversion

StandardProspect
Posts: 1181
Joined: Thu Feb 14, 2008 4:41 pm
Car: '93 Nissan 240SX
'98 Infiniti Q45

Post

I'm sorry, but please solder and shrink wrap those wires

User avatar
maj Andres
Posts: 1030
Joined: Thu Dec 13, 2007 2:09 pm
Car: Zenki, '95 Model, w/ S14SR20DET

Post

All I see in those pictures is the kouki mirror switch. Where's the zenki one?
StandardProspect wrote:I'm sorry, but please solder and shrink wrap those wires
Why did you even cut them to begin with? you could just depin them....

User avatar
J14cm7
Posts: 611
Joined: Fri Dec 04, 2009 10:36 pm
Car: 95 240sx S14 SR20det
Location: Cincinnati, OH

Post

i dont get it? I dont see a diff

duffman1278
Posts: 6816
Joined: Sun Apr 01, 2007 3:09 pm
Car: 89 240sx Hatch, the wildcats!

Post

Did you just prove the 1st law of thermodynamics?

User avatar
Cody240
Posts: 337
Joined: Mon Jul 13, 2009 8:04 pm
Car: 1990 240sx SE white with KA24DE

Post

Dude seriously what? I don't follow oh and I am at the wiring please solder or at least use a proper connector for them

User avatar
zevverlith
Posts: 5
Joined: Fri Feb 05, 2010 2:32 pm
Car: s14

Post

Don't be jealous guys. This is professional. Thanks for the kind words though. Hopefully someday I can have my own name from tha MODZZZZZZZZ!


User avatar
zevverlith
Posts: 5
Joined: Fri Feb 05, 2010 2:32 pm
Car: s14

Post

maj Andres wrote:All I see in those pictures is the kouki mirror switch. Where's the zenki one?

Why did you even cut them to begin with? you could just depin them....
You see... I accidentally already took it off. =\ sorrry about that.

IMAGINATION TIME!

User avatar
zevverlith
Posts: 5
Joined: Fri Feb 05, 2010 2:32 pm
Car: s14

Post

Hoffman5982 wrote:i dont really understand. your title has absolutely nothing to do with what you just did. It looks more like zenki to kouki mirror switch conversion
yeah you're right. edited. thanks

User avatar
motoman399
Posts: 2982
Joined: Mon Oct 09, 2006 9:18 pm
Car: 98' wrecked (RHD coming soon) 240
Location: Eureka, Ca
Contact:

Post

you fail so hard at the write up. mods should give you a custom title that says "i fail"

User avatar
E7-S14
Posts: 5214
Joined: Sun Jun 25, 2006 12:20 pm
Car: ess 14 foo!
Contact:

Post

First and Last pics are identical.there THE same.you messed up.

User avatar
i4jdm
Posts: 276
Joined: Wed Jun 04, 2008 12:57 pm
Car: 1995 240sx (s14) kouki conversion

Post

what's goes on!!!! i dont know what you did . the topic says kouki to zenki but i dont see any difference.

Hoffman5982
Posts: 1805
Joined: Sat Sep 29, 2007 7:20 pm
Car: '95 sr20det 240sx

Post

zevverlith wrote:
then remove the window switch from the zenki and hold it in your hand like this :

Modified by Hoffman5982 at 6:45 PM 2/7/2010

User avatar
Amtk240
Posts: 547
Joined: Tue Sep 02, 2008 6:57 am
Car: 1997 Nissan 240sx SE Red S14, and 1995 Nissan Navan 240sx Ruby Pearl S14.

Post

^^^ Spotted: Chubby chick fingers in photo three! ^^^

This thread fails.........hard!

User avatar
OutToWinPAHC
Posts: 8810
Joined: Thu May 31, 2007 12:19 pm
Car: 2015 Chevy Silverado
Nissan Skyline R33 GTS-t
Nissan Skyline R32 GTR
Nissan RB20 E46 RHD
2015 Harley Vrod Muscle
1990 Nissan Patrol
Location: PA
Contact:

Post

No custom title, you didn't really do anything. You did it wrong, with the wrong tools.

deuce4Oh
Posts: 438
Joined: Wed Mar 29, 2006 4:47 am
Car: 1991 sil-camino,1985 AE86
Contact:

Post

Is it gettin warm in here or is it just me???

User avatar
Wretched
Posts: 265
Joined: Sat Aug 22, 2009 12:51 pm
Car: 93' Hatch

Post

Hoffman5982 wrote:


Modified by Hoffman5982 at 12:17 AM 2/7/2010

User avatar
DMan II-40
Posts: 1234
Joined: Sun Oct 22, 2006 5:49 am
Car: 1995 240SX SE
Location: East Bay Area, CA

Post

Yeah you didnt really explain crap. The whole this is like this..

Do this, cut these, NICE, ok put it together, now its JDM, SICK!!!

Afields81
Posts: 112
Joined: Wed Sep 30, 2009 12:48 pm
Car: Stroked 2jz s14

Post

Thanks op for this thread. You mad me laugh. Two guys well a guy and a girly guy putting thumbs up in every pic. Where did u get the jdm electrical tape from?

User avatar
J14cm7
Posts: 611
Joined: Fri Dec 04, 2009 10:36 pm
Car: 95 240sx S14 SR20det
Location: Cincinnati, OH

Post

zevverlith wrote:Don't be jealous guys. This is professional. Thanks for the kind words though. Hopefully someday I can have my own name from tha MODZZZZZZZZ!
Custom name? they should kick you off nico for posting that garbage.

ILoveMyRHS13
Posts: 2537
Joined: Sat Sep 08, 2007 5:04 am
Car: 1990 Nissan 240sx (Hatch)

Post

StandardProspect wrote:I'm sorry, but please solder and shrink wrap those wires
No kidding... People fail so f***ing hard these days.

fastass
Posts: 364
Joined: Thu Oct 15, 2009 8:51 am
Car: 95 240sx

Post

you absolutely suck.. words feom a once great perso life isnt for everyone. if your going to do something do it right not like you did it.

User avatar
zevverlith
Posts: 5
Joined: Fri Feb 05, 2010 2:32 pm
Car: s14

Post

yeah, I'm not sure how to change the title. I tried. All I hear is some jealous a** people cause they didn't think of changing it first! It's alright tho, my swag still 100. Ya feel me?

User avatar
OutToWinPAHC
Posts: 8810
Joined: Thu May 31, 2007 12:19 pm
Car: 2015 Chevy Silverado
Nissan Skyline R33 GTS-t
Nissan Skyline R32 GTR
Nissan RB20 E46 RHD
2015 Harley Vrod Muscle
1990 Nissan Patrol
Location: PA
Contact:

Post



Return to “240sx General Discussion”