S14 ka24de rebuild, no start

ONLY for ADVANCED technical discussion about the 240sx!
95s14green
Posts: 53
Joined: Wed Dec 22, 2010 12:20 pm
Car: 1995 240sx s14
Location: Haymarket, VA

Post

Hello nico club!

Haven't posted on here in a while because I have been rebuilding my ka24de. I have a 95 s14 with a 97 long block and 95 intake manifold and a 90 ka24e Trans. Car refuses to start. I have spark, car is in time, I'm getting fuel (36 psi when primed, walborro 255 pump), and all fuzes are good. The car was made in February of 94. If there is anything that you guys could reccomend that would be awesome!


User avatar
themadscientist
Posts: 26254
Joined: Tue Nov 12, 2002 3:30 pm
Car: R32 GTR, DR30 RS Turbo, BRZ, Lunchbox, NSR50 Sportster 883 Iron
Location: Staring down at you with disdain from the spooky mountaintop castle.

Post

It ran before you pulled it?

Automatic transmission?

You have fuel pressure, but are the injectors firing?

95s14green
Posts: 53
Joined: Wed Dec 22, 2010 12:20 pm
Car: 1995 240sx s14
Location: Haymarket, VA

Post

When it ran last it had the original 95 ka24 in it and I converted it from an automatic to a 5 speed. I'm getting fuel into the cylinders so I'm assuming its firing

N/A Q45
Posts: 427
Joined: Mon Nov 12, 2012 4:26 pm
Car: 94 Q45

Post

You're 110% sure the car is timed right, cams and dizzy? And unplug the maf just to rule it out. If it doesn't change anything plug it back in, should only take a few sec to try.


Return to “240SX Technical Forum”