s14 ka problems running bad.Need help!!

ONLY for ADVANCED technical discussion about the 240sx!
User avatar
hakosuka86
Posts: 176
Joined: Sun Aug 05, 2007 8:39 am
Car: Toyotas Nissans

Post

the s14 is a 1995 I adjusted the timing so its not running as bad..Idle its a 800RPM BUTit shakes a bit and its leaking a little gas goes down and drips down the header, its a mixture of fuel.plus there's white smoke coming out of the exhaust if i give it gas more smoke comes out.

could it be a head gasket ready to blow?? or excess fuel and fuel on the exhaust which fuel needs to be adjusted????



r3v_v3ng3
Posts: 868
Joined: Sat Feb 24, 2007 7:53 pm
Car: 91 fastback ka-t

Post

make sure you adjusted your timing right.check your fuel linescompression test

User avatar
hakosuka86
Posts: 176
Joined: Sun Aug 05, 2007 8:39 am
Car: Toyotas Nissans

Post

i have to adjust at 20TDC right?that what the book said... Ill check the lines again seems i have a bad leak

thank you


r3v_v3ng3
Posts: 868
Joined: Sat Feb 24, 2007 7:53 pm
Car: 91 fastback ka-t

Post

did you disconnect your tps sensor before you adjust the timing?

User avatar
hakosuka86
Posts: 176
Joined: Sun Aug 05, 2007 8:39 am
Car: Toyotas Nissans

Post

yes i did.

but seems a bit rough still

can anyone please just type me the step by stepand i will do it this way maybe i missed something.

EXAMPLE.

connect batterydisconnect TPS turn car on......

r3v_v3ng3
Posts: 868
Joined: Sat Feb 24, 2007 7:53 pm
Car: 91 fastback ka-t

Post

hakosuka86 wrote: its leaking a little gas goes down and drips down the header, its a mixture of fuel.
how do you know that fuel drips down the header? did you took out the header and see fuel in there? check your ignition system and the injectors

User avatar
hakosuka86
Posts: 176
Joined: Sun Aug 05, 2007 8:39 am
Car: Toyotas Nissans

Post

whoa! found it it was on the line a little rubber hose was all cracked.so as the car moved i guess it just kinda drip'd that direction.

Still white smoke coming out.

I believe I have coolant and or water passing through....OH NO!!!


Return to “240SX Technical Forum”