s14 base model 5 lug conversion. need help.

[Tayluh_240]

So I have the base model s14...dont want 4 lug.And before I buy a 5 lug conversion I was wondering if there was any 5 lug hubs from a different car that would fit on the s14.Maybe from an Infiniti? I dont know,so help me out here,Thanks.

[romerider153]

u mean other then an se s14 the stock stuff fits right on and u can pull rear hubs off a z32

[Tayluh_240]

yea, im looking for somethin other than the SE hubs. And thats good because i know of a z32 in a local salvage yard. thanks.

[samxini]

IIRC they have to be the non-turbo z32 rears?

[romerider153]

i think that it donst mater it unless the splines are diff i dont know for sure but i knnow that either will bolt up its just a matter of axle splines

[supratt1001]

check intensepower.com they sell some sort of hubs

[dan14sweeney]

hey Im new on nico but not to Nissans I was wondering if the front hubs off a z32 would work as well on swapping a base 95 240 to 5 lug because my buddy has a z32 parts car sitting out back of his shop?

[95bloodsx]

Can you use the front and rear hubs from the Z32?? I think somebody already stated this but i wanna be sure.

[SRprelude]

nope just the rear hubs, Id just buy aftermarket 5 lug hubs since factory s14 is hard to find in a junk yard. or you could order s14 front hub assembly complete from a local auto parts store and it should bolt up

for an S13,you would have to buy s14 front lower ball joints and get those pressed into s13 fr lower arms for it to bolt up
Modified by SRprelude at 10:53 PM 4/30/2009