s14 automatic turbo timer install

[vududoc]

need help here with installing a turbo timer into a S14 auto. everything wired up fine but once i shut of the car the turbo timer doesnt do its job in idling the car down......the shift lock wire hasnt been connected so wats going on"? i am not familiar with the s14 auto so i dont know what wire to tap as far as a shift lock. WTF someone help

[solaris22]

there's a single wire going to the ignition (on mine it's gray), try that wire

[vududoc]

will do thx

[Structure240sx]

i jsut put a turbo timer on my s14 which used to be an auto. i didnt splice the nuetral saftey switch or anything and im still useing the auto ecu. i used an hks TT with the s14 harness. the onyl thing i had to do was add a wire into the plug on the harness. the TT had a balck wire that i grounded and a grey wire i didnt even use. heres a link to my thread about ithttp://www.nissaninfiniticlub....start

[vududoc]

yeah i read the thread but wat is the grey wire for? in the greddy manual it say shift lock? so which wire is that or do i just ground it out?

[Structure240sx]

i jsut taped mine up and everything works. prolly just another ground

[vududoc]

yeah with a 5sp its unnecessary not trying to make things complicated but this is on an auto app so imtrying to not cut corners....in the end i just might tape it up and ground it out

[Structure240sx]

yea well my car was an auto. the only thing i did electrically in the 5spd swap was connect two wires from the top plug behind the fuse box so it would start.