s14 auto => S13 sr manual transmission swap(wiring)

[kylaris]

I follwed the zerothread?id=77784 for wiringbut there is no green/blue or brown/yellow so I searched FSM and found out that those are green and brown on S14 harness. So I wired them up, but it still wouldn't crank over. I've check starter, it worked fine.

Any one have any idea?

[zukitek]

If youre working on a s14 under the hood on the right side of the engine compartment to the left of the Battery Junction block is where the auto trans main harness plugs are and here you will find a 2wire connector with 10guage wiring in it .one of thewires comes from the ignition switch and the other goes to the starter .I jumpered this connector on my swap and it completes the starter circuit .I hope this helps

Ricky

[Darius]

search for auto to manual and you will find a couple of very detailed threads that cover the above plug to be jumpered as well as other wiring issues to ensure that your reverse lights work.

[kylaris]

you will find a 2wire connector with 10guage wiring in it .one of thewires comes from the ignition switch and the other goes to the starter .I jumpered this connector on my swap and it completes the starter circuit .I hope this helps

Ricky

Yeah, I wired up a start up button to this wire. Jumping the green and brown wire didn't fool the car which are the wires for the parking.Well, I guess it's sort of anti theft device. Since noone knows how to start even with the keys.