s14 5 speed swap (won't start)

[mr2lickit]

Ok I just got done putting the 5 speed swap in and now my car won't start (1997 240sx)? All lights turn on and I hear the starter pin moving, but when I crank it nothing happens . It makes no noise what so ever. Please help me.... Yes all the wiring is correct!

BAttery has been checked and is perfect.

I read on the 5 speed swap to have those 2 female clips jumpered, but they are jumpered from the factory battery connector.

PLease help asap if possible.

[C-Kwik]

You should clarify if the starter actually rotates the motor or not. You said nothing happens when you crank it. Its a bit ambiguous to call it cranking if it's not turning. Unless it is turning but perhaps not starting.

[mr2lickit]

blah I figured it out myself. Those 4 plugs behind the fuse box that everyone tells me to remove wasn't true in my case. I had to reuse the first one (top one) and jumper it. After I did that the car started and runs awesome. IDk if its b/c my setup is a lil different, or not. I just kept the auto ecu and modified the auto harness to the manual transmission.