s13 wont start after having auto trans replaced

ONLY for ADVANCED technical discussion about the 240sx!
dbcouper
Posts: 3
Joined: Mon Oct 11, 2010 4:10 pm
Car: 93 s13

Post

I recently had my auto trans replaced and found out there was a starter kill under the dash. I went through and carefully removed all of the wires tried to start it again and the egi relay blew, I replaced it now the car turns over, I can hear the fuel pump cycling through but no fire. I checked under the dash again and found a few unused connectors.


dbcouper
Posts: 3
Joined: Mon Oct 11, 2010 4:10 pm
Car: 93 s13

Post

as it turns out the auto trans harness was missing a connector, I took one from the the trashed trans and now it turns over but no spark. tried to post video but failed...........

User avatar
biggie
Moderator
Posts: 8302
Joined: Wed Jul 24, 2002 2:31 am
Car: '16 Q70L/'14 Q60S Vert/'19 Armada/'09 FX35
Location: Clemmons, NC

Post

Probably still missing some wires then, I'd keep checking.

dbcouper
Posts: 3
Joined: Mon Oct 11, 2010 4:10 pm
Car: 93 s13

Post

Pulled #1 plug and there was oil in there! Any recommendations?

Klits562
Posts: 722
Joined: Fri May 15, 2009 8:36 am
Car: white s13 coupe
Contact:

Post

dbcouper wrote:Pulled #1 plug and there was oil in there! Any recommendations?
Do a compression test

User avatar
Patarach
Posts: 270
Joined: Sun Aug 05, 2007 5:00 pm
Car: 240sx convertible KA-T

Post

Oil in where? on top or bottom. bottom do the comp test, top check the valve cover spark plug gasket

Anyone else wanna chime in but wouldn't the inhibitor switch cause this problem?

I say short it out and see what it does no harm done.


Return to “240SX Technical Forum”