S13 wont rev pass 2500rpm ka24de no signal coming from maf

ONLY for ADVANCED technical discussion about the 240sx!
Idris
Posts: 2
Joined: Thu Dec 15, 2011 10:07 pm
Car: S13

Post

New to this tried 2maf sensors same thing this car my Dd please help have no money to waste on just buying maf constantly pm or txt or call any time 813-817-6474


180sx91
Posts: 15
Joined: Sat Nov 12, 2011 4:39 pm

Post

Were those new mafs??

Idris
Posts: 2
Joined: Thu Dec 15, 2011 10:07 pm
Car: S13

Post

No it was a used maf

180sx91
Posts: 15
Joined: Sat Nov 12, 2011 4:39 pm

Post

Well were you sure it was a good maf, if not might not hurt to try a new one

broken40s
Posts: 17
Joined: Wed Jan 05, 2011 11:04 pm
Car: 92/95 240sx, 96 4runner

Post

make sure the maf gets battery voltage and that it has a good ground on the corresponding terminals. after that, try a jumper wire from the maf to the computer on the sensor wire. if it runs fine, then you have a wiring issue and the harness has a bad wire.

User avatar
asoomal
Posts: 2374
Joined: Tue Feb 26, 2008 4:45 pm
Car: 2001 Subaru Impreza L 5MT (Daily)
1992 Nissan 240SX SE 5MT w/HICAS (Being restored)
Location: Canada

Post

http://www.nicoclub.com/FSM/240sx/91-94

And hit up the MAF diagnosis section.


Return to “240SX Technical Forum”