S13 transmission / exhaust mount

[wcbjr]

Anyone know where to pick up another one of these mounts? Mine has destroyed itself over the years.

[numbnuts240]

http://www.courtesyparts.com/2....html

[wcbjr]

I completely forgot about them, thank you.

[sean@z1]

The Isolater NEW from Nissan is 11.16 the bracket that goes to the exhasut is NEW from nissan 29.08the bracket going to the transmission mount to the isolater is NEW from Nissan 31.98

[94_240sx]

Are they same for both auto and manual? I'm asking because I had to modify mine after 5-speed swap. I'm talking about 20651.

[sean@z1]

they are the same as far a manual and auto according to fast the only diffrence is the DE and E motors

[PapaSmurf2k3]

I ripped mine off a long time ago... what is the purpose of it anyway? Just to stabilize the exhaust?

If so, it doesn't really apply to me.

[sean@z1]

that whould be the reason to stableize the exhaust so you do not get so much heat sheild rattle when you drive

[im_looking_for_a_240sx]

lolz...mine fell of while driving...damn low exhaust...

[whyteboi]

i just took mine off when i did my 5 speed swap, that now answers y i have so much rattle under my feet lol

[94_240sx]

i just took mine off when i did my 5 speed swap, that now answers y i have so much rattle under my feet lol

I hope you didn't throw it away. It's highly recommended to have that piece there. idk, mine won't fit after the swap, so I had to bend it slightly. If it won't fit somehow, do the modification like I did. Write up can be found in here.

zer...ge=11

[White Comet]

the pbm cobra uses that stock mount which is nice cuz it takes some of the weight and stress from if it was just hanging off the turbo

[jeff420]

if you dont wanna buy it new from nissan im sure i have quite a few laying around since i have upwards of 13 240's im parting out at the moment.

and it is highly recomended that you have that mount. i thought i diddnt need it when i did my exhaust and header and the stress from the exhaust rattling back and forth ended up cracking my header at one of the welds.

[whyteboi]

ill have to bend mine then cuz there was nowhere to mount to on the 5 speed and i deff dont want it to break s***