S13 taillight removal

[WongFeiHung]

Anybody know how to remove the tailight housing from a s13 coupe? Is it held in w/ goop?

[ride4lame]

i now in the hatch, you pull down the fabric stuff inside the trunk, and there are a bunch of like 10mm nuts holding them in, and there is also goop. I would imagine there there is the same type of setup in teh coupe.

[sr20meplease]

you have to pry them off.....easy don't try to break em but put some force behind it

[yashin]

it's prettty simple undo all the screws that are on the inside of the car, and start at the edges and use a flathead screwdriver to pry/pop it out,

[DeathBy240SX]

There was no goo on my hatch's taillights.

[rudee023]

The goop is pretty strong. Use a flathead to pry them off. Careful not to chip any paint or break the lights.

[Kaizen]

A heat gun or hot blow dry will make you life much easier. It's really fast with little effort. The goop heats up and push it out with your hand.