S13 SR20DET Blacktop swap firing only on cylinder 1

ONLY for ADVANCED technical discussion about the 240sx!
Post Reply
hulk
Posts: 3
Joined: Wed Mar 10, 2010 4:24 am
Car: 1990 Nissan 240SX and a 2004 Dodge RAM 2500

Post

Just got through installing my S13 SR29DET blacktop and it will start but will not idle and is really rough. Checked the spark and only have a spark in cylinder 1. 2,3 and 4 have no spark.
Any help would be greatly appreciated

Top
Biggins240sx
Posts: 59
Joined: Mon Apr 19, 2010 2:35 pm
Car: 1992 Nissan 240sx Stock KA24DE 180,XXX
Location: Lakeland, Fl
Contact:
Contact Biggins240sx

Post

Do you have the plug wires in the correct order? Verify all plugs are good using the spark on cylinder 1 since you have that. Verify all wires are good as well.
Top
hulk
Posts: 3
Joined: Wed Mar 10, 2010 4:24 am
Car: 1990 Nissan 240SX and a 2004 Dodge RAM 2500

Post

Yes we did that as well and that is all well. New plugs installed. We also installed a new harness from Enjuku racing when we installed the engine.
Top
Post Reply

Return to “240SX Technical Forum”

Search for Nissan stuff on ebay!
Find Your Forum!

 

NICOclub's Nissan forums and Infiniti forums and all affiliated sites are the property of HDS Holdings, Inc.
They are independent publications and are not affiliated with or endorsed by Nissan or Infiniti.

Information Copyright © 2000-2026 by NICOclub, all rights reserved. Material may not be copied or reprinted without written permission.

Privacy Policy