S13 SR20 Wring Guide

[GhostDrifter]

I have an SR20 but I don't know how to splice the main JDM Harness with the USDM Harness. Can I get some help.

[SpeedRacer1]

There are only two areas of the harness that need to be spliced. The SR dash harness needs to be repinned or spliced into the KA harness. This is easy since you just match the 7 or so colored wires.

You can see the white dash plug at the upper left:



The other wiring is near the battery, there are 3 plugs that need to have some wires repinned or spliced. The connectors look like this:



And the splicing looks like this (SR wire harness on left, KA on right).



Image courtesy of Heavy Throttle, though its an old image.

[GhostDrifter]

Can you point out which plugs in the battery are which(ex: Which plug is F10?)