S13-SR FSM? (Rod Bearings)

[Neil]

I got my Blacktop on Monday and its chillin out on the engine stand on its side with the upper and lower oil pans off. I have removed the little baffle but the pickup is still there. so is the big brace.

The only FSM i can find for an SR is one for an S14sr. Im trying to figure out what rod bearings I need and the S14 manual seems to say there's a 0, 1, or 2 number on one (or on all?) of the counterweights of the crank. I can see fairly well in there without removing the brace but I dont see any numbers. There's ONE number on the crank right near the back end that reads 60J45. The block is stamped F21222 CBT.

Am i just not seeing the 0,1,2 grade stamps? or do i need an S13 SR manual?

[Neil]

durr pulled #1 conrod bearing

12111-60J00 is my number.

The bearings look phenominal anyway, so im just going to button everything back up.

[180fan]

On the crank you'll see 5 numbers if you're looking at the front of the crank's top row. That's for the calculation of the main bearings, the rod bearings will be the 4 numbers on the lower row.