S13 sr blacktop into s14

For the RWD SR20DET cars! Sponsored by Wiring Specialties.
User avatar
Beems240sx
Posts: 457
Joined: Mon May 19, 2008 5:16 pm
Car: built S14, E30, R6 raven

Post

Ok well I've searched and searched but I havnt come up with anythng at all and it sucks. I'm not getting fuel or spark. I do have fuel pressure and the fuel pump is kicked on. I have power to all the coils but still nothing. What is the main power wire for the ecu look like?


xThe_Onex
Posts: 6
Joined: Tue Aug 07, 2007 6:11 pm
Car: 95 nissan 240sx

Post

wat kind of ecu are u running? i did this swap a while back, and i was having ur problem except i only got spark in cylinder 1 and 3. found out that my motor was wired for a j4 ecu and i was trying to run an e5 ecu. took mine to a shop so i dont know the exact wires, the mechanic said there was 2 or 3 wires that he repinned to make it run on a redtop ecu.

aznrib
Posts: 85
Joined: Fri Jun 23, 2006 5:43 am
Car: 1995 240sx

Post

-Check wiring to to the ignitor chip and try another ignitor chip. -Check grounds for the coil packs which is on the back of the head/valve cover-Check fuses for the ECM


Return to “SR20DET Forum (rear-drive)”