S13 running S14 Lower Control Arms! HELP

[eshaze]

Hi need a bit of help! Any advice would be sweet!

Running front S14 spindles, hubs and lower control arms, so that the front has a wider track, does anyone know.... if you have to change the steering rack or do the stock S13 track rod ends extend enough to compensate for the longer S14 arms? Is anyone running this setup? Going to try today to sort out the tracking.

ThanksSam

[dnlx5]

i didnt know the difference in width of the s14 was due to the suspension

[4wheeldrifts13]

I too am running s14 lower control arms and 5 lug spindles. but as far as changing the rack, no. *(Make sure your wheel bearings are good before swapping) Also, I am running Tein Tie rods and ends/spacers.

[eshaze]

Awesome thanks for your help!