S13 RB25 drive shaft to S14 drive shaft

Discuss the RB20, RB25 and RB26 series engines.
Yellow4g63
Posts: 3718
Joined: Mon Jan 20, 2003 6:07 pm
Car: 95 Nissan RB20 240SX RB20
91 Nissan NX2000 VE power
95 Nissan 240SX Stock
Contact:

Post

Can I use the drive shaft from a S13 RB25 in a S14? Or are they different lengths? same mounts Mckinney on both cars. Both 25 transmissions.


Ramius83
Posts: 740
Joined: Sat Apr 19, 2003 8:58 am
Car: 1995 240sx SE
Location: Cumming, GA

Post

Should be the same.......might be a slight difference, but the McKinney driveshaft compensates for that by not being wedged in between the trans and diff.

Yellow4g63
Posts: 3718
Joined: Mon Jan 20, 2003 6:07 pm
Car: 95 Nissan RB20 240SX RB20
91 Nissan NX2000 VE power
95 Nissan 240SX Stock
Contact:

Post

I'll let you know for sure today.

Yellow4g63
Posts: 3718
Joined: Mon Jan 20, 2003 6:07 pm
Car: 95 Nissan RB20 240SX RB20
91 Nissan NX2000 VE power
95 Nissan 240SX Stock
Contact:

Post

Ok s13 shaft is a little short. It works tho temp till Monday.

Ramius83
Posts: 740
Joined: Sat Apr 19, 2003 8:58 am
Car: 1995 240sx SE
Location: Cumming, GA

Post

How much shorter? Take a pic of the tailshaft and slip-joint if you can. There is supposed to be a little slack.......

Yellow4g63
Posts: 3718
Joined: Mon Jan 20, 2003 6:07 pm
Car: 95 Nissan RB20 240SX RB20
91 Nissan NX2000 VE power
95 Nissan 240SX Stock
Contact:

Post

Image

That's what it looked like. The new one I installed today was a good 3" longer and a by far better fit.


Return to “RB20DET / RB25DET / RB26DETT Forum”