s13 problems

ONLY for ADVANCED technical discussion about the 240sx!
User avatar
sr20_powerd
Posts: 12
Joined: Thu Mar 29, 2007 1:38 pm
Car: s13 sr20det redtop-3"O2 -3"downpipe -3"exhaust" fmic -blitz access ecu

Post

hi i have a 89 nissan s13 with sr20 and basic mods. a little while ago i noticed that my drivers side only have about 1.5" of clearance between the rear tire and the fender while the passenger side have more than 2" of clearance. i replaced my springs and struts all the way around the car with kyb agx's and rsr race springs and its still like that. i thought maybe it was the weight of the exhaust but that seems wierd to me. someone please helpthanks trav


MaximA32

Post

Are the AGX's set the same all the way around?

User avatar
sr20_powerd
Posts: 12
Joined: Thu Mar 29, 2007 1:38 pm
Car: s13 sr20det redtop-3"O2 -3"downpipe -3"exhaust" fmic -blitz access ecu

Post

the rears are set at 5 and the fronts are set at 3

User avatar
sr20_powerd
Posts: 12
Joined: Thu Mar 29, 2007 1:38 pm
Car: s13 sr20det redtop-3"O2 -3"downpipe -3"exhaust" fmic -blitz access ecu

Post

anyone??? bad rucas maybe??

User avatar
adrianfromthecastle
Posts: 18849
Joined: Wed Jun 29, 2005 5:36 am
Car: 1992 Nissan 240sx
Location: California

Post

I think it's just a weight imbalance... I thought its usually the other way around (since gas tank is on passenger), but when I had my spring/ strut combo, it wasn't super duper even either (though, to the naked eye it was).

when was the last time you got an alignment? any car accidents lately?

User avatar
sr20_powerd
Posts: 12
Joined: Thu Mar 29, 2007 1:38 pm
Car: s13 sr20det redtop-3"O2 -3"downpipe -3"exhaust" fmic -blitz access ecu

Post

no accidents lately but i havent had an alignment done in quite a while. maybe ill try that.thanks


Return to “240SX Technical Forum”