s13 power window question

[Yo-jAn]

ok to make it quick and easy my s13 is rhd and im using an r32 dash. for the reason that i did a rb25 swap and to be different....
ok so i used an r32 chassis harness and the only thing to get the car rolling is my power windows.

how can i get the windows to go up and down? i tried looking into both wiring diagrams but no luck.

any ideas would be appreciate it. dont really care how i could make it work, as long as they work.
thanks

[xX RB Xx]

get manual windows. problem solved.

[breadbox]

if you are not using wiring diagrams to do the swap at all IDK what to tell you.

find the pinout

[Yo-jAn]

i wish i can find a manual window 240 around where i live, and the few that have s13s here have power window, the only thing i cant do is drive to back to orlando where i used to live and find some manual windows.

but before driving 3 hours away, i wanted to see if anyone had any inputs, i have try the FSM for both cars but nothing clicks in my head yet lol...

[good2go240]

well on s13s there is a little black box on the driver side door under the pannel has like 10 wires coming out of it. that is the window motor amp. you connect the wires from the passenger side switch to the same color wires on the switch on the door side you ground out the black wire on some metal on the door ( scratch paint on ground spot to bare metal). then you run the two power wires into the fuse box. i ran mine into the cig lighter fuse i never use it cuz im not a smoker and its not good enough to power any charger. get a tester to test which side of the fuse is not on when the car is off. thats how i put mine in from having manual windows. hope this helps. use the fsm diagram to find out which colors are the power. any questions just let me know.