s13 manual window question

General discussion forum about the 240sx, and a great place to introduce yourself to the board!
User avatar
95silvia14
Posts: 873
Joined: Wed May 17, 2006 3:41 pm
Car: 1995 240SX, 1993 s13 coupe

Post

so the cable on my window snaped. and since its damn imposible to find one at the local junk yards. i was wondering if i could maybe just pull the regulator assembly out of the door and just replace the cable. it looks like just a standard steel cable.


User avatar
srpowered240sx
Posts: 12661
Joined: Wed Jun 29, 2005 1:17 pm
Car: 90 240sx-sr, 92 F-150, 00 bmw 323ci, 1991 s13 coupe, 99 F250 Dsl

Post

95silvia14 wrote:so the cable on my window snaped. and since its damn imposible to find one at the local junk yards. i was wondering if i could maybe just pull the regulator assembly out of the door and just replace the cable. it looks like just a standard steel cable.
probably, ive never tried. i have replaced about 12 240 windows. but never had just the cable snap. give it a try, its only gonna cost a couple bucks for cable and some kind of ends.

sir420
Posts: 4
Joined: Mon Oct 09, 2006 5:32 pm
Car: 85 300zx and 2 90 240sx

Post

I actually replaced the broken cable on my 240. What I did was go to my local bike shop with the cable and asked them if they had something similar in size and length. I then trimmed it to exact length and had to solider on a little ball for it to lock into the plastic drum. Then i replaced the rivets I drilled out with short bolts and washers. But after a little while of having to reach across the car to roll down passenger window did the manual to power window swap. And been loving the power ever since. :dblthumb:

User avatar
breadbox
Posts: 8549
Joined: Tue Oct 17, 2006 4:09 pm
Car: 89 Nissan 240SX
89 Koop
84 720 4x4KC
Location: Va Bch

Post

Yeah didnt think I would care about power windows that much until I started driving the coupe around.

Going to a mountain bike shop seems like a good way to get that cable.


Return to “240sx General Discussion”