s13 ka24e trans issue!!

[macneilbmxr]

Hi i have a 1990 s13 coupe. the stock clutch went in it so i got a new one and replaced it. after putting everything back together and bleeding the lines i started the car and the clutch felt all wrong. when i pushed it to the floor to start it only came back up about half way maybe less. but when i push down to (try) and put into gear in doesnt grind it trys to move forward? so i tryed starting the car with the clutch to the floor while it was in first and it bucked forward while foot was still on the floor. need car asap. easy fix? or pulling trans again?? Thanks
Modified by macneilbmxr at 10:33 PM 2/5/2009

[scottydog]

The clutch is not engaging completely. Try adjusting the clutch pedal. There is a brass rod that connects the pedal to the master cylinder. Loosen the locknut and turn clockwise. Keep adjusting till it feels right.

[macneilbmxr]

ok so i adjusted the clutch pedle bracket and re: bleed the system and nothing? clutch comes all the way back up now and feels good but doesnt disingadge when u push it in still?