S13 JDM Fog Light wiring.

[myees13]

Hello,I recently installed a Silvia front end on my 1993 240 coupe. The headlight wiring was very straight forward. I believe I have the "newer" 3 projector lights. My question is concerning the inner foglights. I have heard of people wiring them into the pop-up motor switch. This would be a clean install using a factory button, and the wires are all ran.

My problem is that the Silvia foglights have 2 wires coming out, and the plug for the pop-up motor has like 5. Which wires should I splice into for the fog lights.

Thanks in advanceMike

[tyrannix]

somebody check me on this, but i remember it being the black and brown/black stripe ones

and if you dont want the fogs to be finickey and always on when your headlights are on, you have to take out one of the relays, i think its the one closest to the front of the car in the relay box near the battery

did you get your stock 240sx bumper support to work with the silvia bumper?

[myees13]

Thanks, Im going to try to wire the fogs in the next few days.

I didnt get either the 240 or the Silvia bumper suppourt to work. I am currently driving with none, but the people Ive talked to all do the same.