S13 ignitor pinout

For the RWD SR20DET cars! Sponsored by Wiring Specialties.
User avatar
Eikon
Posts: 6928
Joined: Sat Apr 24, 2004 3:20 am
Car: 71 240z, 93 Supra TT
Location: Lake Orion, MI
Contact:

Post

Can someone take a look at the ignitor wires on their SR harness for me.

My harness was cut, so I am going to just solder the wires directly to the ignitor.

I know the 4 wires on one side, and the 5 wires on the other side... I just don't know what order they go to the ignitor.

Is this correct.... I am taking this from the heavy throttle write up on the Z32 ignitor and making a guess.. 4 pin side - Red/Blue, Red/White, Red, Red/Green5 pin side - Red/White, Red/Yellow, Ground, Red/Green, Red/Blue

So if someone could take a quick look at the ignitor and explain which wires go to which pins.. that would rock!!! A photo would be nice as well as long as the wire colors are visable..

Thanks guys!



kingdutka
Posts: 209
Joined: Wed May 02, 2007 8:18 am

Post


User avatar
Eikon
Posts: 6928
Joined: Sat Apr 24, 2004 3:20 am
Car: 71 240z, 93 Supra TT
Location: Lake Orion, MI
Contact:

Post

I saw that site before.. in fact, that's what I used to make my guess.

But, they are for the Z32 or Q45 ignitors..

I just need to verify the stock SR20 ignitor pinout to wire colors..


Return to “SR20DET Forum (rear-drive)”