s13 FRAMERAILS

[I_Farted]

any companies make aftermarket framerails for our 13s??

[wynnEZ]

Im not sure about aftermarket but I know you can get OEM replacements.

[OutToWinPAHC]

The term fram rail on the 240 is often misused since these cars dont have frames. Just a unibody. But I assume you have a rotted rail? If you do you can cut one from a junk car. Or cut out the damage and rust, fabricate, and repair your own. My car had rust issues and thats what was done.

[DrifterXRPS13]

^ listen to him kiddies..he knows his stuff.

[!Zar!]

You can buy a new rail from nissan.

I've seen it done before.

Honestly, I'd just cut it out and coat the bottom.I wouldn't even waste the time/money to replace it.

I find it pointless.

It isn't a must to have. JDM car's don't even have them.

[I_Farted]

You can buy a new rail from nissan.

I've seen it done before.

Honestly, I'd just cut it out and coat the bottom.I wouldn't even waste the time/money to replace it.

I find it pointless.

It isn't a must to have. JDM car's don't even have them.

[White Comet]

You can buy a new rail from nissan.

i don't think there are many, if any left in the US

[ZOMG.SR20]

i bought all 4 that were left hehe

[!Zar!]

i don't think there are many, if any left in the US

Probably right.

I'd have to check, but it's too late right now.

[I_Farted]

i bought all 4 that were left hehe

hey hey SCrew you man... just gotta learn how to weld i guess

[livinglegend2100]

you can get them. but its difficult. and knowing nissan, your gonna pay about $13,486 each..

[I_Farted]

you can get them. but its difficult. and knowing nissan, your gonna pay about $13,486 each..

i guess it would be a better idea to fab up my own...going community college within the next year and hopefully ill come outta there with some welding knowledge...

[livinglegend2100]

ya for real. or just find someone whos good at it already and do some serious *** kissing.

[White Comet]

you can get them. but its difficult. and knowing nissan, your gonna pay about $13,486 each..

if theres no more theres no more though. cut the rails off of a junked car and weld on in. no need to completely fab something

[g63tawd]

You can still get them I got one in the fall it took about 2 weeks and was only about $60 I would have to find the number if you want it, I got the one for the drivers side.

[S13Joe]

for $60 bucks? i would just fab up my own if i knew how to weld. You can just bring your car to an auto body place and see how much they would charge for cutting out and replacing.

[Echonova]

I removed mine and used 2x4's from Home Depot. The weight savings was unbelievable.

[livinglegend2100]

I removed mine and used 2x4's from Home Depot. The weight savings was unbelievable.

[I_Farted]