s13 dual projector fog light wiring??

[raf702]

I followed the directions and triple checked my connections. And the fog lights on my s13 dual projectors still wont turn on. I used the old pop-up button to activate the fog lights. I even replaced the fog light bulbs as well, and removed relay #4 on the fuse box next to the battery. And still nothing, I'm sure the pop-up button is still functional cause when I press that button when the car is in the "ON" position, I can hear a click coming from the engine bay as if its making some electrical connection. I'm stumped, any ideas anyone? Thanks

[placham]

Why dont you try the fog light connector. It's behind the battery, gray plug, 2 wire, has dummy plug/cap on it, should be orange and black color wires. You'll also need the 10A or 15A fuse and relay into the fussy box in engine compartment. Connector for fog light switch is behind the gauge bezel/ or where your flip-up/hazard/defrost switches are at.They work with low beam only, that's how its set up from factory.Think its controlled by Blue/green wire coming from light switch. If you want them to be on no matter of the head lights. Than you would have to connect this wire to like parking lamps or ignition switch wire(with key on) so they would go off when ignition is off. GL