S13 Driveshaft Bolts

[imGreek]

Does anyone know what size the 4 driveshaft bolts are, that connect to the dif? Thanks!

[s13_chris]

Post removed by moderation staff

[Justin35ll]

what do you mean by size?I know the head is a 14mm

[DJ_SLapo]

4 bolts 12 or 14mm.

Here is one of the write up-s on LSD that deal with removalhttp://www.nicoclub.com/articles.php?id=217546

[jeff420]

axle bolts are 12mm, driveshaft are 14mm.

but seriously, if you must ask then maybe 240sx_ch08 is right. ive torn my 240 down to pretty much a bare shell and built it back up and if i ever wondered what size a bolt was, i put a wrench or socket to it.

[OM3GA]

Ive got some oem ones for sale, $200 for all 4 with nuts.

[240dx]

Ive got some oem ones for sale, $200 for all 4 with nuts.

SOLD if op doesnt take them first

[Taylor008]

you are a lazy pile. go take the car to a mechanic if you must ask this. this is a car enthusiast site. not a sit in the mechanics waiting room and discuss on wifi. To sum this all up for you mr. imGay, GO OUTSIDE WITH A BOX OF f***ING TOOLS AND LOOK.

Whoa whoa whoa. Chill. I'm 99% positive he doesn't mean the head size, but thread pitch and length.

[OutToWinPAHC]

Make sure you get a proper grade as well. Some sites sell 10 and 12 grading. Cost more but worth it.

[gumby74]

I THINK they are M10mm x 1. pitch OR M10 x 1.25. They are fine thread, but I cannot say with absolute certainty that they are one or the other.

It just occured to me that the thickness is more important than the pitch.

[jeff420]

Ive got some oem ones for sale, $200 for all 4 with nuts.

200 for the driveshaft bolts? seriously? hell i got like 30 or so of those bolts with the nuts lol.

[240dx]

I think M10 x 1.25 by ?? im not sure the length but like OUTTOWIN said get a proper grade

[ryanhampton]

BallerBolts sells the drive shaft bolt kit for the S-13

[bloodspread]

buy them at the dealer, thats what i did and they weren't that expensive

[94_240sx]

buy them at the dealer, thats what i did and they weren't that expensive

That's what I do too. Most of the time, they have been treated, so tehy should last longer than some random bolts from hardware store. Most of all, they are designed to take the factory torque spec.

[ryanhampton]

I wouldn't trust even OEM in high horsepower application. Nissan OEM hardware is only rated at metric grade 8.8 (92 KSI), if you look in the right place, you can find grade 12.9 (170 KSI) that is nearly twice the yield strength of the stock bolts. I have been building race cars since 1992 and I never use stock hardware in critical application. As for price, OEM is really expensive compared to looking in the right place for high strength bolts.

[Papi Chulo]

Just use zip ties

[youngs13lover]

do u think it will hold LMAO^^^

[AZ89two4Tsx]

Ive got some oem ones for sale, $200 for all 4 with nuts.

haha