s13 brakes

[240SOHC89]

im planing on changing out my front rotors and pads, can ne one give me a directions like step by step? or direct me to a Topic that is already here, im goin to have my friend help me but i dont feel 100% with him doin it, would really appriciate it : ) ty

1989 240sx XE -s13 dont think i have abs

[180fan]

fronts:- pull the lower pin bolt out- rotate caliper up- now you've access to the pads. pull the pads and the shims off- push the piston into the caliper (with the cap off the brake fluid reservoir)- get the new pads and apply the brake grease on the back of the pad and put on the new shims onto the back of the pads- slide the pads back on and rotate the caliper back down and tighten down the pin bolt.

rear:search this. basically the same stuff, just instead of rotating, pull the caliper off ala the two pin bolts and instead of pushing the piston in, it screws in.

[240SOHC89]

kool but also im taking off the rotors, and getting new ones...

[jeremy242]

once the calipers are off he rotor will just slide off the studs. It might need a little provoking if it is rusted on. ebay normally has some good deals on rotor and pad combos. I got a brembo set from them for 250 i think.