S13 blacktop that was on a s14 now going into a s13 Wiring question :)

Post by **tvmendoza** » Mon Sep 21, 2009 4:42 am

I bought my swap from a nico member at MO, he made his swap into his S14 and now I want to make it work on my S13. I already did the dash connector using the ECU pinout and the FRSport write up.

What I want to know if is I need to change anything else regarding wiring?The lower harness is almost completed my question is more regarding the upper harness.

ThanksTona

Post by **tvmendoza** » Thu Sep 24, 2009 7:58 am

no one

Post by **david200095367** » Thu Sep 24, 2009 11:06 am

take the dash interface plug the s14 one and you need to split it in 3 according the the diagram. one goes back under the dash and then 2 plugs next to the battery tray. Also swap over a s13 1 wire coolant temp sensor.

Post by **tvmendoza** » Thu Sep 24, 2009 11:19 am

ok, So i got all the wires from the dash, know I need to find the collant temp sensor and the other two? Do you know what are they?

S13 blacktop that was on a s14 now going into a s13 Wiring question :)

S13 blacktop that was on a s14 now going into a s13 Wiring question :)

Re: S13 blacktop that was on a s14 now going into a s1 ... (tvmendoza)

Re: S13 blacktop that was on a s14 now going into a s1 ... (tvmendoza)

Re: S13 blacktop that was on a s14 now going into a s1 ... (david200095367)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums