s13 blacktop coolant temp sensor

[wannaS13]

ok i need a coolant temp sensor (2 pin-ecu) for my sr and i cant find the one i need ....the only one i can find has square corners and the one i need has rounded corners i tried all the one for every nissan i could think of ....i did find one on courtesyparts but it is for a 300zx will this work? also i was told my motor may be a type x is this why the sensor is different?

[180fan]

try the s14 ka

[AmoebAssassin]

I heard the 91 SR20DE Sentra SE-R works, as well as the S13 KA24DE sensor.

[ILikeMy240sx]

CTS -> for ECU use from 91 SE-R (I have it)

CTS -> for gauge is chassis dependant

[wannaS13]

i tried the one for a 91 ser it has square corners and the one i need has rounded corners. will the 300zx on work? also the ser plug has one off centered plug and the 300zx one has two like the one i need

here is the ser plug: http://www.partsamerica.com/Pr...set=A

here is the 300zx like i need: http://www.courtesyparts.com/M..._Code=

[wannaS13]

anyone?

[whiplash willy]

I am having the same problem too. I bought the ECU CTS from Phase 2. They said it will work with the KA24de and SR20det. It looks like the SER CTS, but the plug won't fit. My SR CTS plug won't even plug into it.

[garagelu]

Try phase2motortrend.com. They sell the sensor. http://phase2motorsports.store....just scroll down and choose the type x blacktop. But i would call to make sure this is the right one. Make sure your engine is really a type x.