S13.4 conversion!!! (i'm here for answers...)

[SLiguykyle]

since i already know this is going to get a lot of flaming from people on here, let me tell u this now. if you're gonna flame, or if u don't wanna help, GTFO of my thread.

for those of you who are willing to hear me out, thank you.

I'm doing a S13.4 Zenki conversion on my hatch, and i have been reading up that people have found conversion fenders for sale through AIT? i am only finding these:
http://www.aitracing.com/shop/index.php ... ts_id=1007
they look like kouki fenders. is there fenders i am missing?
i have already swapped core-supports, and intend to make this conversion the best fitting to my personal ability, but i am stuck with the fender availability issue. i would be perfectly willing to have someone custom make me some fenders if the fitment and quality would be good, and the price is low enough. if anyone knows where i can get fenders, or have fenders made, please let me know. i have done all the research i can, and have yet to see any zenki-compatible conversion fenders for sale.

the other question i have, is what is the best way to mount the hood to make sure it's spot-on-centered and not crooked? at this point in my conversion, it's looking like a tap+die set is probably going to be required... does anyone have any alternatives or ideas? thank you everyone who's willing to give me information and help. you will be mentioned when it is completed <3

[SLiguykyle]

anyone?

[Klits562]

i didnt look at the link on company computer so i cant but if they look like kouki fenders then they probably are since thats the popular front end of these conversions.

So idk if anyone makes zenki conversion fenders cause not alot of people do it, but what you can do or have someone do, instead of makeing new fenders just pick up some zenki fenders and you can either get junkyard s13 fenders or your own s13 fenders cut the front half off both sets of fenders and weld the front of the zenki fenders to the back of the s13 fenders. This isnt just a cut n weld procedure though you have to measure everything to make sure they fit right.

[SLiguykyle]

yeah, that's what i think it's going to come to. however, i dont know anyone who could do it. and seeming as i dont even have a welder, that's not gonna be me

p.s. if anyone knows anyone who can do this for me, or is capable of doing this, please let me know! thanks ^^

[sldewyz]

yeah, that's what i think it's going to come to. however, i dont know anyone who could do it. and seeming as i dont even have a welder, that's not gonna be me

p.s. if anyone knows anyone who can do this for me, or is capable of doing this, please let me know! thanks ^^

heres a pic of my good buddies conversion with ait fenders....he said the fitment is kinda rough... but hes an autobody guy so he did all the refitments and all...

[SLiguykyle]

...my good buddies conversion with ait fenders....

that's kouki.... ZENKI plz.

[Klits562]

I think i saw a thread on here with someone who did the zenki conversion on a hatch leme look around if i find it you might be able to get answers from the guy who posted it

[SLiguykyle]

I think i saw a thread on here with someone who did the zenki conversion on a hatch leme look around if i find it you might be able to get answers from the guy who posted it

that'd be siiick if u could find that thread i sure couldn't. :\

[Klits562]

I think i saw a thread on here with someone who did the zenki conversion on a hatch leme look around if i find it you might be able to get answers from the guy who posted it

that'd be siiick if u could find that thread i sure couldn't. :\

Ya i couldn't either my bad idr where i saw it. You could check out the Nissan for sale thread i think i saw someone parting out an s13.4 zenki