S13 240sx viper system questions

[venom90s]

1- would i need to convert my manual locks to power locks from an se so the viper system can lock & unlock the doors with the remote? (i mean lock&unlock mechanically not arming&disarming the system)2- if so what is involved in doing the power door lock conversion, is there wiring 2 b done or what parts would i need?3- can any one confirm if th power door harness from an se are plug n play for chuki base models?

Thanks in advanced for your help.
Modified by venom90s at 1:48 AM 12/15/2009

[Fenvy]

you need a pair of door actuator, you can almost get them from any car. they however won't be plug and play but it's not too hard either since all you need is the 12v and ground and tap the signal wire directly to the alarm

[venom90s]

they however won't be plug and play but it's not too hard either since all you need is the 12v and ground and tap the signal wire directly to the alarm

do you mean the door actuator or the power window harness?

[the converted]

There are aftermarket door lock actuators that you can use instead of getting power doors if you want to. Then it's just a matter of wiring them up.