Hey guys i can get my hands on rx7 injectors and i was wondering if any of you knew anything about them. i know that they are 550cc injectors that they are side feed but are they high or low impedence, i guess that can be over come.
also i hear they use a primary and secondary would there be an issue with flow in regards to that.
RX7 sidefeed 550cc injectors
-
mallbor240SR
- Posts: 369
- Joined: Sun Nov 28, 2004 9:48 pm
- Car: 240sx 1990
- Location: NJ
- Contact:
Re: RX7 sidefeed 550cc injectors (scarboroughdub)
86-87 fc3s injectors are low inpedance
88-91 are high impedance
88-91 are high impedance
http://www.nissansilvia.co.nz/...s.htm
everything you need to know
the collars seem to be difficult to locate though, I tried JRP but you have to get them directly from blitz, and they were like 35 usd a peice
good luck
everything you need to know
the collars seem to be difficult to locate though, I tried JRP but you have to get them directly from blitz, and they were like 35 usd a peice
good luck
-
scarboroughdub
Re: (yashin)
wicked now i got all the info i needed thanks buddy.
collars i will make so it should not be a problem.
collars i will make so it should not be a problem.
-
lee_harvey
- Posts: 96
- Joined: Wed Sep 22, 2004 8:46 am
- Car: 93 nissan 240sr
Re: RX7 sidefeed 550cc injectors (scarboroughdub)
i have a set of these. they are high impedence and have been flow balanced within .5%. i also have the clips so they will plug right in. PM me if u want them.
Re: (yashin)
i need the link !!
-
shotgunhunter4
- Posts: 205
- Joined: Thu Oct 14, 2004 12:08 pm
- Car: 240sx
-
scarboroughdub
Re: (shotgunhunter4)
whoever needs the link send me a email and i will send you the website as i have downloaded it when it was still up.
my email info is under my name info.
my email info is under my name info.