Runs like cr@p before warming up....

For the RWD SR20DET cars! Sponsored by Wiring Specialties.
User avatar
jdm_sao
Posts: 5
Joined: Thu Oct 14, 2004 6:02 am
Car: 95' Nissan 240SX SE, S13 Blacktop...

Post

I have an S13 blacktop in an S14. When I start my car up,after it has had time to cool completely down, I have to let it sit for about 10 minutes to warm up, before it runs right. If I only wait like two minutes and try to drive, the car will feel like it wants to stall out, and shakes, unless I give it lots of gas. I have to gas it up to like 2k-3k rpm for it to feel right. Im thinking it might have something to do w/ fuel delivery. The only fuel related mods I have is a 300zx fuel filter, and a Nismo fuel pump. I also have an SAFC II installed. Its not really that bad of a problem, just kind of annoying...any ideas???


RMiller
Posts: 872
Joined: Wed Dec 24, 2003 8:50 am
Car: BBQing

Post

heater wire on o2 sensor? Did you connect the o2 sensor power wire to a 12 volt switch?

User avatar
got2b240
Posts: 475
Joined: Tue Jul 13, 2004 4:50 am
Car: 91' RPS13 = GT28R, 525cc, Z32 Mafs & SAFC, Blitz EXST & FMIC, Silvia VLSD
Contact:

Post

your Dec. Air settings will greatly affect the cars idle and warmup stage on startup. I used to have to change it to get the car started, but now I recirculate


Return to “SR20DET Forum (rear-drive)”