Rubbing noise when car is rolling backwards

[wzntha]

.

[jdmxbB]

this sounds almost what happened to mine.

mine was worse it's more of a screech.

but i figured it out that it was my brake disc.

so go check that out on yours that could be

just the problem. or your pads.

[JesterX18]

check your caliper its probably seizing. if it's coming from the front take it off and squeeze the piston with a huge pair of pliers. If the piston dpesn't want to move its seized and holding the brake pads applied. Happened to my 240sx in the rear caliper.

[gabo]

jack it up and spin it by hand forward/reverse and listen for the noise.

[Sileighty_85]

are you sure its from the front and not the rear? Some S-chassis rear caliper assembly will vibrate against the rotors and make a grinding noise when backing upits normal

[ShaunakaRichard]

I second that. I've heard five different 240s that do that. It happens occasionally, its normal.

[wzntha]

.

[locoluna825]

When was the last time you changed your brakes? Mine used to do the exact same thing only when rolling backwards after I change my brakes it just went away.

[wzntha]

.

[locoluna825]

when i changed mine i also found out i had a bad caliper, that might be the issue too, when i used a vice to squeeze it down the seal around the pistol busted and brake fluid came out all over it was sad.