Ross Crank Pulley

[StricNyne]

anyone have any experience with this , its around 300 usdm for a dampened crank pulley and its lighter than stock !!! the ati i think is like 900 bux !!! this is aussie made

[JerryRigRB240]

Well I would really like to hear more about this. I saw the price for the ATI one and said **** it. If this one's 300 and good quality I'd be down.

[rbosacco]

where did you run across info on it?

[nissanman04]

yes, link please?

[Chaos the Xile]

ummm the ATI is not 900 bux, do a little more research. I have seen them for $300+ Love to see this tho...

[StricNyne]

http://www.justjap.com/parts_nengine.htm

http://www.uniqueautosports.co...e.htm

btw those r ausssie currencyBOOYAW !!!

[Sil240]

ummm the ATI is not 900 bux, do a little more research. I have seen them for $300+ Love to see this tho...

I have never seen the ATI for $300, the $900 is a custom ATI pulley.After 2nd quarter Unorthodox Racing has a new crank dampner coming out for imports.

[minivan_don]

http://www.justjap.com/parts_nengine.htm

http://www.uniqueautosports.co...e.htm

btw those r ausssie currencyBOOYAW !!!

both links are in Auzzy funds.

[Coolwhip]

both links are in Auzzy funds.

http://xe.com

[Carl H]

would like to see further development on this as my crank pulley was accidentaly dropped and it now looks like some x'ed out raver took a huge chomp out of it...

[nissanman04]

looks like some x'ed out raver took a huge chomp out of it...

hate when that happens

[FAST-DATSUN]

PLEASE remember there is a BIG differnace in a dampener and a pulley. A pulley is just there and a dampener reduces the vibs of the rotating crank and rods.. $900 is alot of money, but if the pulley causes bearings to fail or crank problems, what is the cost.....the ATI unit is a dampener not a pulley... Is the ROSS a pulley or a dampener??????????????????

[Carl H]

the ross unit appears to be a dampener.fwiw you can use a rb25 crank pulley on a rb20 with no ill problems and it weighs less...http://www.rosstuffbond.com.au...m.htm

[StricNyne]

yeah ross is a dampner, but i also heard that a dampened pulley is not needed unless on a large displacement vehicle, dont get me wrong i rather pay a little xtra now that a lot later but thats just something i heard, sofar it looks like i might be the guinea pig on the ross...

[Sil240]

yeah ross is a dampner, but i also heard that a dampened pulley is not needed unless on a large displacement vehicle, dont get me wrong i rather pay a little xtra now that a lot later but thats just something i heard, sofar it looks like i might be the guinea pig on the ross...

Where did you hear that??????That’s TOTALLY WRONG!!!!!

First of all the RB like most Import motors from the early 80’s on are Internally Balanced. They are not Externally balanced like old school domestics.The pulley on the RB is just a pulley.The rubber in the pulley is just to quiet down the motor.Its for what the OEM calls NVH Noise Vibration and Harshness.So that when mom and dad drive the car, there’s no noise when the A/C kicks on and etc…A real damper must be Pressed on.It doesn’t matter how tight you bolt on the pulley it will move and not properly transmit/dampen vibrationThis is what a real damper looks like:http://images.google.com/imgre...a%3DN

[Chaos the Xile]

I have never seen the ATI for $300, the $900 is a custom ATI pulley.After 2nd quarter Unorthodox Racing has a new crank dampner coming out for imports.

Check eBay, I have seem them on there for hella less than $900last on ei saw was a BIN for $259+Shipping

ROSS Appears to be a dampner by the design and the notches on it for timing adjustments.

[s14 2510's]

you get what you pay for. Im glad i went with an ati dampner. At 10k there will be vibrations no matter how well the lower end is built. Id rather do it right than do i twice.

[minivan_don]

how long ago did you see either on ebay selling for $259 ???

ive been looking for the past 2 months and i never came across anything that cheap.... you should have bought it !!

[Coolwhip]

if you look closely in those ebay ad's for those ATI dampners they list others for that 259 price and then in the description the RB and most other motors are priced at their respective prices. $900

[Chaos the Xile]

if you look closely in those ebay ad's for those ATI dampners they list others for that 259 price and then in the description the RB and most other motors are priced at their respective prices. $900

No this is an auction a BUY IT NOW for $259. ATI Damper not some other sh..t your talking about. It was like a month ago I saw that on there minivan don. I hust searched "RB25" and/or "RB25DET" and saw them.

[Bluefire]

No this is an auction a BUY IT NOW for $259. ATI Damper not some other sh..t your talking about. It was like a month ago I saw that on there minivan don. I hust searched "RB25" and/or "RB25DET" and saw them.

research the completed auction... the very last line of the auction says its for an sr20det. Price for RB26/RB25 is $700AUD

-Bluefire

[StricNyne]

if someone knows a dealer iw will guinea pig

[Chaos the Xile]

research the completed auction... the very last line of the auction says its for an sr20det. Price for RB26/RB25 is $700AUD

-Bluefire

Oh hahaha my bad.

[StricNyne]

anyone know any resellers ?

[minivan_don]

bump !!

i would consider this if we could get some better pricing/group buy going compared to what ive seen in the past

[StricNyne]

ok i was quoted like 4 and some changed shipped to the US i ask if interested in a groupbuy, when he responds i will ask kamin if the terms are acceptable and i will post it up for the masses

[BoostFab]

i dont like the idea of ligthened pully. have you all heard the term crank-walk!?? becareful as your bearings may wear out improperly and death to your engine. the ATI damper worth every penny, if you can't afford one, let the stock one on the engine alone.

[StricNyne]

this is a lightened DAMPENED crank pulley, 2 peice made of billet steel and not cast like oe, my friend has a 2gen dsm i know crank walk lol !!!