Revhard Turbo Mani

[240sx-T]

I have searched through and through. I need to know what turbos fit the revhard manifold.

[Craving4Boost]

turbos with either a t3 or t4 flange, which is a good thing about the revhard.

[daconkiftador]

I thought you searched through an through?

Some of the revhard manifolds only accept T3 Turbochargers, and some identical revhard manifolds accept both T3 and T4 Turbochargers. If your worried about master brake cylinder clearance, get an "on-center" turbocharger.

FYI, but since you mentioned that you've ALREADY searched, im sure you know this, but you can mount the RevHard Manifolds to be a bottom-mount setup aswell as a top.

[240sx-T]

can you tell me what an on center turbo is and who makes them.

[Florida240sx]

Search again.... Bunch of companies make them. turbonetics, precision turbo

[C-Kwik]

can you tell me what an on center turbo is and who makes them.

An On-Center turbine housing is designed so that the center of the turbine entry flange is on the same plane as the turbine wheel axis (with the plane being perpendicular to the entry flange). They are only available with T4 Turbines and any turbo manufacturer using Garrett's specs are likely making an on-center design. Bear in mind that the T4 is also available in a tangential style as are all other turbos so you can't order any T4 and expect it to have an on-center turbine.

[WDRacing]

With Revhard, a T3 or a On-center T4 will fit. Here is a pic of both...On-center is on the right.

[elpiar]

I read somewhere the a topmount t3 (tangential) on revhard manifold will get very very close to the MBC on s13, is this true?

if that's the case, can I do bottom mount?

I'm plannig to put t3/t04e

what about GT32? will it fit?