Resistor Box Rb26 High Impedence Injector Question

[Insported]

Ok i have a set of ID1000's waiting to be installed in my 95 GTR and im just wondering if any one else has done this already. I need to remove the resistor box and i'm just not 100% positive how it needs to be re-done. From what i believe and correct me if im wrong, you wire in all of the black wires that originally ran into the resistor box and wire them straight into the white 12v power source wire that ran to the resistor box as well?

Any help would be appreciated as i want to tune the damn car this weekend!

Thanks, Derek!

[Carl H]

quick and dirty way is to cut the pack plug off of the pack and just wire them all together...its that simple.

[Ramius83]

Good injector choice BTW. As Carl said, just wire all the wires at the resistor box together. I just cut off the plug on the main harness, literally wrapped them all together, and soldered them with a torch so the solder would "soak" in. Just to b sure, I did a voltage drop check from that point to all the injectors and had less than 0.006V drop across the circuit, so all is good.